Installing the iColor ProRIP Software


(Be sure to remove your Antivirus software from your computer. If this is not possible, please have it turned off until after the install is complete and the ProRIP is set as a trusted program)


1.    Now you need to open the ProRIP Software case and take the dongle (USB) out. The case could be red that is with your printer.

a.    Every dongle (USB) that comes in the case has a different number. If you multiple dongles, this will help you identify them

2.    Insert the dongle into an open USB port on your computer 

a.    You may want to get a USB hub so you can plug multiple USB drives into one port

3.    Once your computer does its checks on the dongle, the files will be available to see 

a.    Double click on the ProRIP software folder to open it

4.    Another set of folders are now available 

a.    Double click on the iColor ProRIP v2 folder

5.    Now double click on the iCPro application file 

6.    A user account control window will pop up asking to verify CADlink to make changes, click YES 

7.    The CADlink install wizard will start, choose the language you wish to use 

8.    A UniNet Logo will pop up and an loading bar, this stays up for just a few seconds. 

9.    You will then be instructed to connect the Dongle, this has already been done.

a.    Press the next button

10.    Now you will need to choose either the 32-bit or 64-bit type 

a.    64-bit is the recommended type, click next

11.    Welcome to install wizard come up, click next 

12.    The license agreement comes up next, click except and next 

13.    Next you will choose Full install or only product plug-ins 

a.    Being the first time installing, Choose Full install

14.    Now you can change where the folder will be saved at, click next 

a.    It will have a folder preset or you can adjust it

15.    The next screen shows you where an icon will be placed, click next 

a.    You can change where you want the icon placed

16.    Now the install of the ProRIP soft will start 

17.    After the install is complete, press finish 

18.    You now have the iColor ProRIP v2 icon on your desk top 

19.    Double Click the ProRIP icon to open it 

20.    A First Time Setup pop up will come up, make any adjustments to display units decimal placed

21.    Next the Create Queue Wizard comes up, press next 

22.    Now you will need to press Install Printer 

23.    From here you will choose the UniNet printer you have, Press OK

24.    Next you will be on ‘Add Printer’ 

a.    Choose the way you wish to get your printer package(s)

25.    Once the “Device Package” is loaded, it will show the Printer on the printer default page

26.    Click “next” and the iColor ProRIP should start.