This is covering how to set up any paper that is not the Epson General Purpose paper for the F570

From the “Home” screen press “Settings


Then choose “General Settings


Choose “Customer Paper Settings


Choose a number from 1-10


Rename the number to match the paper being used


After renaming the paper, go to “Advanced Media Settings


This is where you can make adjustments to the following:

 Platen Gap – 1.6(default), 2.1, or 2.6


Back Tension – Auto, Standard, High, Extra High


Drying time per pass – 0 to 10 seconds, time the print head pauses to allow drying between passes.


Drying time per page – 0 to 60 minutes, time the printer pauses to allow drying between prints