Below you will find the print driver settings for Corel, Adobe Photoshop, and Adobe Illustrator. 

 

CorelDRAW Print Settings

  1. When setting up a new art board use the following Settings
    1. The paper size will need to be set to what you plan on printing on

  1. Once the Photo is set and any adjustments have been made, use the following steps:
    1. Go to “File” and “Print”
    2. From the printer selection window choose, SC-F500 Series
    3. Click on the Printer Settings option and set the printer settings as follows

  1. After the settings are changed, press “Okay”
  2. Now that you are back at the printer selection window, click on the “Color” tab
  3. Make the following adjustments:
    1. **For Vector Art change the Rendering Intent to Relative Colorimetric**
      1. You will choose either the Rigid or Textile Color Profile depending on the substrate
        1. Rigid will be for Hard Substrates
        2. Textile will be for Soft Substrates

 

 

 

 

 

 

 

 

Photo Shop Print Settings

  1. When setting up a new art board use the following Settings
    1. The page size will be set to the size you plan to print on
    2. The background will be your choice of transparent or solid color

  1. Now bring you Photo in and make all adjustments needed, use the following steps:
    1. Go to “File” and “Print”
    2. Make the following adjustments on the Printer Selection window
    3. Copies can be changed to the number of prints you are doing for the current job
      1. **For Vector Art change the Rendering Intent to Relative Colorimetric**
      2. You will choose either the Rigid or Textile Color Profile depending on the substrate
        1. Rigid will be for Hard Substrates
        2. Textile will be for Soft Substrates

  1. Once that is done, choose the Printer settings option and make the following adjustments

  1. Once adjustments have been made, click OK
  2. Now you are able to press print and start printing

 

 

 

 

 

 

Adobe Illustrator Print Settings

  1. Create a new document with the following settings
    1. The paper size will be set to what you plan on printing

  1. Now bring you Photo in and make all adjustments needed, use the following steps:
    1. Go to “File” and “Print” 
    2. Under the General Selection, choose the SC-F500 Series as the printer
    3. Under Media Size, choose the size of paper you are printing to.

  1. Click on setup, then Preferences in the next window

  1. Once the adjustments are made, press OK
  2. Press “Print” on the Printer Window
  3. Move to the Color Management section of the Printer selection screen
    1. Make the following adjustments
      1. **For Vector Art change the Rendering Intent to Relative Colorimetric**
      2. You will choose either the Rigid or Textile Color Profile depending on the substrate
        1. Rigid will be for Hard Substrates
        2. Textile will be for Soft Substrates

  1. Once all these adjustments have been made, press Print.